the latest generation of water-based, 1-component acrylic lacquer for hard floors such as concrete and microcement. The newly developed formula strengthens the adhesion of the topcoat. The mineral content materials also provide extra resistance, wear resistance and durability. The primer is easy to apply and contains ingredients that prevent yellowing. Allow the Primer to dry for 2-3 hours and use the BD Eco Concrete Seal 2K HD as a finish and protection. 2 layers of 2K topcoat must be applied. This Seal 2K HD topcoat is very suitable as a finish for project use and heavily loaded surfaces.<\/span><\/p>\n <\/p>\n 1. Before applying the lacquer, the surface to be treated must be clean, free of grease and wax, free of dust and dry. Thoroughly clean and degrease used floors beforehand! 2. Dilute the Concrete Primer with 20% water, stir well. Apply the 1st coat of paint liberally and evenly to the surface with BD microfibre roller 9mm. Pay attention! The consumption of the lacquer strongly depends on the absorbency and the nature of the substrate. Apply a second coat of primer undiluted after 2 hours on highly absorbent substrates. 3. After the primer has dried for 2-3 hours, liberally apply the 2nd coat of BD Eco Concrete Seal 2K HD. Roll well wet in wet and ensure an even appearance as a result. 4. After 3-4 hours of drying, you can apply the 3rd coat. If the 3rd layer of lacquer is applied after 12 hours, the floor (2nd layer of lacquer) must be lightly polished with sanding gauze grit 320 for better adhesion. Then make the surface dust-free and apply the 3rd and last layer of lacquer in the same way. After 12 hours, the treated surface can be lightly loaded. This is fully cured and can be heavily loaded after approx. 10 days. Processing, consumption, drying and loading are highly dependent on factors such as ventilation, humidity, temperature, etc.<\/span><\/p>\n We recommend three different products for the maintenance of the Eco Concrete Seal 2K HD. First of all, you can use BD Eco Multi Cleaner\u00a0 for weekly maintenance. In addition, we recommend the BD Soft Balm for monthly maintenance. Finally, you can use Blue Dolphin Polish for major or annual maintenance of your wooden floor. Make sure that you remove the old layer before applying a new layer of polish. BD Eco Concrete Primer is available in a 5L container. Meets the VOC limit value. Consumption: 10-12 m\u00b2\/L<\/span><\/p>\nProcessing<\/h6>\n
<\/pre>\n
Maintenance<\/h6>\n